Good news, iron-on patches are back in trend once again. They are a great way to express yourself and add a personal twist to your apparel, backpack, et cetera. They are a fantastic accessory for adopting a vintage vibe or jazzing your bag. Besides, if you are throwing away your favourite garment as it has a terrible stain or rip, hold on. Throwing away that apparel is unnecessary when you can refresh it with iron-on patches.
If you don’t know how to apply them, it is better to acquire relevant and correct guidance. Getting started without proper instructions may lead to blunders during your first attempt. Hence, this blog gives step-by-step advice to walk you through the process.
9 Easy Steps To Apply Iron-On Patches Like A Professional At Home
A warning:
After successfully implementing the below steps, you might feel tempted to apply iron-on patches to everything you own.
STEP 1: Examine Whether You Want To Place Can Be Ironed Safely
The beginning of the procedure involves you examining the spot where you want to place your personalized iron on patches check the iron symbol on the apparel’s tag or label to ensure it is safe for ironing purposes. The logo appears like a tiny icon for a household ironing machine. And if there is a cross over it, it simply means that the garment is not meant for it. Moreover, one, two, or even three dots represents low, medium, and high intensity.
However, if either there is no label attached to the clothing or it isn’t safe for heating, consider sewing. It will prevent any damage to the material. The most suitable fabrics for this purpose are denim, cotton, polyester, and cotton blends. Besides, heat doesn’t suit fabrics like vinyl, leather, nylon, silk, or any other animal-made.
STEP 2: Select The Spot Where You Want To See the Badge In Advance
Once you ensure the clothing is safe while heating, select where you want to adhere to the badge. Lay down your apparel and add a tiny dot to the centre of your desired spot using a fabric marker for marking. If hiding a hole with an emblem, it should cover more than 0.64 cm around the edges of the rip. Besides, if you have any plans to include more badges, leave adequate room for them. The trendiest locations for the placement are the elbows and back of jackets or sweaters, baseball caps, bucket hats, a pocket of jeans, and shirts.
STEP 3: Prepare The Ironing Machine
This stage requires you to prepare the machine by setting the temperature to the highest peak your garment can take. Increase the temperature for thick fabrics like denim, while medium or medium-high for polyester and cotton is appropriate. Here is a pro tip: Ensure the steaming option is off and there is not even a little water in the machine. Moisture can decrease the effectiveness of the adhesive item. Moreover, if you use chenille custom patches, use medium heat as the thread is sensitive to high temperatures.
STEP 4: Arrange Your Apparel And Iron-on Patch On The Top
Lay down your apparel on the ironing board and arrange it so the clothing has no wrinkles. Use a flat, neat, heat-proof surface if you don’t have a board. Also, utilize a bath towel by doubling up over the table. Moving forward, peel off the backing and place the badge on the garment. The adhesive side of the emblem should be flat with no crooked angles. Place fusible webbing between the apparel and piece if there is no gluey substance on the backing. It will act as a substitute.
STEP 5: Place The Parchment Paper Over The Badge
In this stage, place the parchment paper over the badge vigilantly so that you don’t move the position of the emblem. The extra layer on top of the garment and the piece protects them from excessive heating. Plus, it also keeps the apparel safe from any additional leakage of adhesive solution.
STEP 6: Heat The Badge For Up To 40 To 60 Seconds
Once everything is ready, begin the primary process. Iron over the emblem with firm pressure and keep it moving around for about forty to sixty seconds. Continue the procedure until the adhesive solution on the backing melts and sticks to the garment. The medium-sized emblem will require at least thirty seconds, while large ones might take up to one minute. Don’t instantly place the ironing machine over the desired spot because the low temperature will result in low effectiveness. Therefore, wait for the device to heat up to a suitable temp.
STEP 7: Apply Heat To The Backside Of The Badge
After implementing the sixth step, flip the apparel to apply heat to the backside of the badge for the best results. Apply firm pressure on the back for about thirty seconds to ensure the adhesive glue fully melts. There is no need for parchment paper or a thin layer of cloth over here. Instead, directly apply heat to the fabric. Moreover, carefully flip over the apparel if the piece has not yet adhered to the clothing.
STEP 8: Let It Sit For Awhile
Do not check the results immediately after heat pressing. Instead, let it sit for a while and let the emblem cool down. Later, flip the apparel again to check the edges of the piece with one finger. Even if there is a slight border movement, it has not yet adhered to the garment. In such a case, place parchment paper on top and iron it for about ten seconds. Repeat this procedure until it fully secures the garment. If you decide to customize the iron-on patch, don’t forget to get guidance from the makers related to its application.
STEP 9: Sew The Iron-On Patch If Required
If the iron-on patch will not stay glued to the garment for longer and you want a secure option, sew it. Choose a thread of the same colour as the border of the piece. Use a sewing machine or a needle and sew all around the edges. Go for a straight stitching method, as it does a good job. It will ensure that the emblem will stay fixed to the clothing rather than falling off later.
Closure
With this, we successfully described the nine steps to iron on patches like a professional at home. We hope this detailed guide has given you a clear understanding of the application. Put the above information into action to amp up the look of your garment or accessories with personalized badges.
Best of luck!